Sc2CdAg
metal· JVASP-39111· Sc2CdAg
Sc₂CdAg is a ternary intermetallic compound combining scandium, cadmium, and silver. This is a research-phase material studied primarily in materials science for its crystal structure and potential functional properties, rather than a production alloy with established engineering applications. The scandium-cadmium-silver system is relevant to researchers investigating lightweight metal combinations and intermetallic phases, though practical applications remain limited and the material would be considered experimental for engineering design purposes.
Research alloy developmentIntermetallic phase studiesMaterials characterizationLightweight metal systemsCrystal structure investigation
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 78.17 | GPa | — | ||
Poisson's Ratio(ν) | 0.3500 | - | — | ||
Shear Modulus(G) | 33.04 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 6.182 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | 22.12 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.01390 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.3042 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.