poly(dimethylsiloxane)
polymerPoly(dimethylsiloxane), commonly known as silicone, is a synthetic elastomer composed of a backbone of alternating silicon and oxygen atoms with methyl groups attached. It is widely used across consumer, medical, industrial, and aerospace sectors due to its exceptional thermal stability, low-temperature flexibility, chemical inertness, and biocompatibility. Engineers select PDMS over conventional polymers when applications demand resistance to extreme temperatures, UV exposure, moisture, or when direct contact with biological systems is required.
medical device seals and tubingthermal insulation gasketsbiomedical implants and prostheticsconsumer cookware and food contactadhesives and sealantsaerospace engine components
Compliance & Regulations
?UL 94?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Strength(σc) | — | ksi | — | — | |
Flexural Strength (MOR)(σf) | — | ksi | — | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | — | — | |
Young's Modulus(E) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Glass Transition Temperature(Tg) | — | °F | — | — | |
Melting Point / Solidus(Tm) | — | °F | — | — | |
Maximum Service Temperature(Tmax) | — | °F | — | — | |
Thermal Conductivity(k) | — | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Refractive Index(n) | — | - | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.