PLA (FDM, Raise3D Hyper Speed PLA) — Properties & Data | MatWorld

PLA (FDM, Raise3D Hyper Speed PLA)

· Hyper Speed PLA

Raise3D Hyper Speed PLA is a polylactic acid filament grade printed by fused deposition modeling, formulated for extrusion at higher print speeds than standard PLA. Like other extruded PLA, parts are built from fused beads and are anisotropic, weakest across layers, where strength depends on interlayer bonding. It shrinks and warps little and needs no heated chamber, but parts show layer lines, stair-stepping on curved surfaces and marks from supports under overhangs. Printed parts serve as rapid prototypes, concept and display models, and lightly loaded jigs and fixtures kept near room temperature. Every value on this page is read from Raise3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

rapid prototypesconcept modelsdisplay modelslightly loaded jigslightly loaded fixtures

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

PLA (FDM)/PLA (FDM, Raise3D Hyper Speed PLA)

Units:

si imperial

Filter by

Source

HDT Load

Property	Value	Unit	Conditions
Glass Transition Temperature(Tg)	331.8	K	—
Heat Deflection Temperature(HDT)2 entries	331.2	K	0.45 MPa load · ISO 75
↳	328.2	K	1.8 MPa load · ISO 75
Melting Point / Solidus(Tm)	443.2 range 428.2–458.2	K	notes

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Filter by

Specification

Property	Value	Unit	Conditions	Source
Density(ρ)	1.210	kg/m³	ISO 1183, GB/T 1033
Water Absorption(WA)	0.4000	%	ISO 62: Method 1

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.