PH13-8Mo is a precipitation-hardening martensitic stainless steel (13% Cr, 8% Ni, 2.4% Mo, 1.1% Al) used in aerospace fasteners, springs, and airframe components requiring high strength (yield strengths 1240–1380 MPa) combined with moderate corrosion resistance and cryogenic toughness; the "sta" condition denotes stress-relieved and aged hardening for optimal mechanical properties and dimensional stability.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | 2,000 | ksi | 22°C · Round, hex, square and flat bar | ||
Poisson's Ratio(ν) | 0.2800 | - | 22°C | ||
Shear Modulus(G) | 11,000 | ksi | 22°C · Extrusion/Forging | ||
Young's Modulus(E) | 2,000 | ksi | 22°C · Round, hex, square and flat bar |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | µin/in·°F | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (16 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2790 | lb/in³ | 22°C |