PH13-8Mo Stainless Steel H950
VerifiedmetalPH13-8Mo stainless steel is a precipitation-hardening martensitic stainless steel containing molybdenum and copper that delivers high strength (typically 1,310 MPa yield) with good corrosion resistance, suited for aircraft engine components and fasteners. The H950 condition is aged to provide peak hardness and tensile properties while maintaining adequate ductility and fracture toughness for critical aerospace applications per AMS 5629.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
Thickness
Basis
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Round, hex, square and flat bar | — | |
Elongation at Break(εf)4 entries | — | - | 22°C · Round, hex, square and flat bar · H950 · AMS 5629 · L · t=<9.0 in | — | |
| ↳ | — | - | 22°C · Extrusion/Forging · H950 · AMS 5629 · L · t=≤12 in | — | |
| ↳ | — | - | 22°C · Round, hex, square and flat bar · H950 · AMS 5629 · LT · t=<9.0 in | — | |
| ↳ | — | - | 22°C · Extrusion/Forging · H950 · AMS 5629 · LT · t=≤12 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Reduction of Area(RA)4 entries | — | - | 22°C · Round, hex, square and flat bar · H950 · AMS 5629 · L · t=<9.0 in | — | |
| ↳ | — | - | 22°C · Extrusion/Forging · H950 · AMS 5629 · L · t=≤12 in | — | |
| ↳ | — | - | 22°C · Round, hex, square and flat bar · H950 · AMS 5629 · LT · t=<9.0 in | — | |
| ↳ | — | - | 22°C · Extrusion/Forging · H950 · AMS 5629 · LT · t=≤12 in | — | |
Shear Modulus(G) | — | ksi | 22°C · Extrusion/Forging | — | |
Stress–Strain Curve(σ–ε) | Curve (15 pts) | ksi | 21°C · L | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 7 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | — | ksi | 7 entriesClick to expand | ||
Young's Modulus(E) | — | ksi | 22°C · Round, hex, square and flat bar | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | µin/in·°F | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (16 pts) | BTU/(hr·ft·°F) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.