PH13-8Mo is a martensitic precipitation-hardening stainless steel (13% Cr, 8% Ni, Mo, Al) that achieves ultra-high strength in the H1000 condition through age hardening, providing yield strengths around 1310 MPa with good corrosion resistance and fatigue performance for aerospace fasteners, bearings, and critical structural components. The H1000 temper represents maximum strength conditioning and maintains useful strength to approximately 300°C with excellent bearing fatigue and fatigue crack growth resistance, making it suitable for demanding load-bearing applications where both strength and corrosion resistance are required.
Compliance & Regulations
16 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)4 entries | 2.082 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=1.5 | ||
| ↳ | 2.158 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=1.5 | ||
| ↳ | 2.772 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=2 | ||
| ↳ | 2.868 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=2 | ||
Bearing Yield Strength(Fbry)4 entries | 1.813 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=1.5 | ||
| ↳ | 1.910 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=1.5 | ||
| ↳ | 2.330 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=2 | ||
| ↳ | 2.455 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in · e/D=2 | ||
Compressive Modulus(Ec) | 13.79 | GPa | 22°C · Round, hex, square and flat bar | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (11 pts) | Pa | 21°C · L | ||
Compressive Yield Strength(Fcy)4 entries | 1.379 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · L · t=<8.0 in | ||
| ↳ | 1.455 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · L · t=<8.0 in | ||
| ↳ | 1.379 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · LT · t=<8.0 in | ||
| ↳ | 1.455 | GPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · LT · t=<8.0 in | ||
Elongation at Break(εf)4 entries | 10.00 | - | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · L · t=<8.0 in | ||
| ↳ | 10.00 | - | 22°C · Extrusion/Forging · H1000 · AMS 5629 · L · t=≤12 in | ||
| ↳ | 10.00 | - | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · LT · t=<8.0 in | ||
| ↳ | 10.00 | - | 22°C · Extrusion/Forging · H1000 · AMS 5629 · LT · t=≤12 in | ||
Poisson's Ratio(ν) | 0.2800 | - | 22°C | ||
Reduction of Area(RA)4 entries | 50.00 | - | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · L · t=<8.0 in | ||
| ↳ | 50.00 | - | 22°C · Extrusion/Forging · H1000 · AMS 5629 · L · t=≤12 in | ||
| ↳ | 40.00 | - | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · LT · t=<8.0 in | ||
| ↳ | 40.00 | - | 22°C · Extrusion/Forging · H1000 · AMS 5629 · LT · t=≤12 in | ||
Shear Modulus(G) | 75.84 | GPa | 22°C · Extrusion/Forging | ||
Ultimate Shear Strength(Fsu)2 entries | 806.7 | MPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in | ||
| ↳ | 841.2 | MPa | 22°C · Round, hex, square and flat bar · H1000 · AMS 5629 · t=<8.0 in | ||
S–N Curve (Wöhler)(S–N) | — | Pa | 10 entriesClick to expand | ||
Stress–Strain Curve(σ–ε) | Curve (15 pts) | Pa | 21°C · L | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))2 entries | Curve (8 pts) | Pa | 21°C · L | ||
| ↳ | Curve (8 pts) | Pa | 21°C · L | ||
Ultimate Tensile Strength(σUTS) | 1.386 – 1.434 | GPa | 7 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 1.310 – 1.379 | GPa | 7 entriesClick to expand | ||
Young's Modulus(E) | 13.79 | GPa | 22°C · Round, hex, square and flat bar | ||
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | 1/K | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (16 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 7.723 | kg/m³ | 22°C |