PEI
polymerPolyetherimide (PEI) is a high-performance engineering thermoplastic known for its excellent thermal stability, dimensional consistency, and mechanical strength at elevated temperatures. It is widely used in aerospace, automotive, electronics, and medical device industries where components must withstand demanding thermal and chemical environments while maintaining structural integrity. Engineers select PEI over standard engineering plastics when applications require sustained exposure to heat, superior rigidity, and good chemical resistance without the brittleness or processing difficulty of thermosets.
aerospace cabin componentsautomotive under-hood partselectrical connectors and insulatorsmedical device housingshigh-temperature bearing cageschemical processing equipment
Compliance & Regulations
?UL 94?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Elongation at Break(εf) | — | - | — | — | |
Flexural Strength (MOR)(σf) | — | Pa | — | — | |
Ultimate Tensile Strength(σUTS) | — | Pa | — | — | |
Young's Modulus(E) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Glass Transition Temperature(Tg) | — | K | — | — | |
Melting Point / Solidus(Tm) | — | K | — | — | |
Maximum Service Temperature(Tmax) | — | K | — | — | |
Thermal Conductivity(k) | — | W/(m·K) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Refractive Index(n) | — | - | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.