PDMS
polymerPolydimethylsiloxane (PDMS) is a silicone-based polymer characterized by a Si-O backbone with methyl groups, offering exceptional flexibility, thermal stability, and chemical inertness across a broad service temperature range. It is widely used in medical devices (implants, tubing, seals), consumer electronics (protective coatings, adhesives), microfluidics, and laboratory applications where biocompatibility and resistance to thermal cycling are critical. Engineers select PDMS for applications requiring low-temperature flexibility combined with hydrophobic surface properties and minimal leaching, though its relatively low modulus necessitates careful design in load-bearing roles.
medical device seals and tubingmicrofluidic lab-on-chip devicesthermal insulation coatingsbiocompatible implant materialselastomeric gaskets and O-ringsmold-making and soft lithography
Compliance & Regulations
?UL 94?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Strength(σc) | — | Pa | — | — | |
Elongation at Break(εf) | — | - | — | — | |
Flexural Strength (MOR)(σf) | — | Pa | — | — | |
Hardness (Vickers)(HV) | — | HV | — | — | |
Ultimate Tensile Strength(σUTS) | — | Pa | — | — | |
Young's Modulus(E) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Glass Transition Temperature(Tg) | — | K | — | — | |
Melting Point / Solidus(Tm) | — | K | — | — | |
Maximum Service Temperature(Tmax) | — | K | — | — | |
Thermal Conductivity(k) | — | W/(m·K) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Refractive Index(n) | — | - | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.