PA12 (FDM) — Properties & Data | MatWorld

PA12 (FDM)

PA12 printed by fused deposition modeling is a semi-crystalline polyamide thermoplastic, fed as filament and deposited through a heated nozzle, typically on industrial systems with a heated build chamber. The process leaves a layered structure with visible road lines, small voids between beads and weaker bonding between layers than along the deposited paths, so strength and elongation are lowest in the build direction. Warping from uneven cooling is controlled with bed adhesion and chamber temperature, and overhangs need removable support. Parts are used for jigs, fixtures, functional prototypes, housings and ducts needing toughness and chemical resistance.

jigsfixturesfunctional prototypeshousingsducts

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

PA12/PA12 (FDM)

Conditions

Stratasys FDM Nylon 12, as-built

Measured as printed

Each row is one condition this material was measured in. Its values and curves are in the tables and charts below, labelled with the condition; the ranges here span that row's own cited values and are never averaged across rows.

Condition	Values	Curves
Stratasys FDM Nylon 12, as-built	1	0

Units:

si imperial

Filter by

Statistic

Source

Specification

Property	Value	Unit	Conditions
Glass Transition Temperature(Tg)2 entries	93.25	°F	Stratasys FDM Nylon 12, as-built · as-built · ASTM D7426
↳	114.9	°F	—
Melting Point / Solidus(Tm)	355.2	°F	—

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.