PA11 (SLS, BASF Forward AM Ultrasint PA11) — Properties & Data | MatWorld

PA11 (SLS, BASF Forward AM Ultrasint PA11)

· Ultrasint PA11

BASF Forward AM Ultrasint PA11 is a PA11 powder grade for selective laser sintering, in which a laser fuses successive layers of polymer powder in a heated bed. The surrounding unfused powder supports the part, so no support structures are needed. Parts come out slightly porous with a matte, grainy surface, and they are weaker and less ductile across the layers than within them; they are depowdered and bead blasted, and often dyed or smoothed. Laser-sintered PA11 is more ductile and impact tolerant than laser-sintered PA12, so it is used for functional prototypes and end-use parts such as snap fits, hinges, housings and ducts. Every value on this page is read from BASF Forward AM's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

functional prototypesend-use partssnap fitshingeshousingsducts

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

PA11 (SLS)/PA11 (SLS, BASF Forward AM Ultrasint PA11)

Units:

si imperial

Filter by

Source

Property	Value	Unit	Conditions	Source
Glass Transition Temperature(Tg)	319.5	K	—
Melting Point / Solidus(Tm)	476.2	K	ISO 11357

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Filter by

Property	Value	Unit	Conditions	Source
Density(ρ)	1.020	kg/m³	DIN EN ISO 1183-1

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.