P2F is a ceramic material with a composition not fully specified in available documentation, likely belonging to a phosphate or fluoride-based ceramic family. It is employed in applications requiring moderate stiffness and dimensional stability at elevated temperatures, with particular relevance in thermal management, electrical insulation, and structural applications where a balance between rigidity and toughness is needed. The material's selection over alternatives typically hinges on thermal shock resistance, cost-effectiveness, or compatibility with specific processing environments in industrial ceramics.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 5,950.9 | ksi | DFT · OptB88vdW | ||
Poisson's Ratio(ν) | 0.3800 | - | DFT · OptB88vdW | ||
Shear Modulus(G) | 3,605.6 | ksi | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.09859 | lb/in³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | DFT · OptB88vdW | ||
Magnetic Moment(μB) | 0.000 | µB | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.8048 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf) | -0.2244 | eV/atom | DFT · OptB88vdW |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data