MgBeCr
metal· JVASP-67818· MgBeCr
MgBeCr is an experimental ternary intermetallic alloy combining magnesium, beryllium, and chromium. This material family is primarily of research interest for aerospace and structural applications where the combination of low density (from Mg and Be) with enhanced stiffness and thermal stability (from Cr) is desirable. Limited commercial deployment exists; the alloy remains largely confined to materials research and advanced applications development due to beryllium's toxicity concerns, difficult processing, and the complex phase behavior of multi-principal element systems.
aerospace structures (research phase)high specific stiffness applicationslightweight intermetallicsthermal management systemsadvanced materials researchpotential space vehicle components
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.