LiCd2Rh
ceramic· LiCd2Rh
LiCd2Rh is an intermetallic ceramic compound combining lithium, cadmium, and rhodium elements. This is a specialized research material rather than a widely commercialized engineering ceramic, studied primarily for its electronic, magnetic, or structural properties in controlled laboratory settings. The material family of ternary intermetallics is of interest in materials science for exploring novel phase relationships and potential applications in advanced electronics or catalysis, though practical engineering adoption remains limited due to cost, toxicity concerns (cadmium), and processing challenges.
research and developmentintermetallic compoundselectronic materials (experimental)catalysis studiesphase diagram investigationmaterials characterization
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2963 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg)2 entries | 0.000 | eV | — | ||
| ↳ | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -8.940 | µV/K | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.2845 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.