Li₃P is an inorganic ceramic compound composed of lithium and phosphorus, belonging to the family of lithium phosphides. This material is primarily of research and developmental interest rather than established in high-volume production, with most applications concentrated in solid-state battery and energy storage development where lithium compounds are critical for ion transport and electrochemical performance.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 40.81 | GPa | DFT · OptB88vdW | ||
Poisson's Ratio(ν) | 0.1600 | - | DFT · OptB88vdW | ||
Shear Modulus(G) | 36.69 | GPa | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 1.485 | kg/m³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg)2 entries | 0.9010 | eV | DFT · OptB88vdW | ||
| ↳ | 1.283 | eV | DFT · TBmBJ | ||
Dielectric Constant (Relative Permittivity)(εr)2 entries | 11.41 | - | DFT · PBE | ||
| ↳ | 9.366 range 7.017–11.72median of 2 measurements | - | DFT · PBEsol | ||
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries | 7.394 | - | DFT · OptB88vdW | ||
| ↳ | 6.788 | - | DFT · TBmBJ | ||
Electronic Dielectric Tensor(ε∞) | Matrix (redacted) | - | DFT · PBE | ||
Total Dielectric Tensor(ε) | Matrix (redacted) | - | DFT · PBE | ||
Magnetic Moment(μB) | 0.000 | µB | DFT · OptB88vdW | ||
Spectroscopic Limited Maximum Efficiency (SLME)(SLME) | 33.23 | % | DFT · TBmBJ |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf) | -0.7896 | eV/atom | DFT · OptB88vdW |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data