Li2SnTeO6
ceramic· JVASP-45327· Li2SnTeO6
Li2SnTeO6 is an experimental ternary oxide ceramic composed of lithium, tin, and tellurium. This compound belongs to the family of lithium-based oxides under active research for energy storage and electrochemical applications, where the combination of these elements is being evaluated for potential use as an ion-conducting phase or component in advanced battery or fuel cell systems. While not yet widely deployed in commercial products, materials in this chemical family are of interest to researchers developing next-generation solid electrolytes and energy conversion devices where lithium-ion transport and ceramic stability are critical.
solid electrolyte researchbattery materials developmentelectrochemical devicesionic conductor evaluationmaterials screening for energy storagehigh-temperature ceramic applications
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Dielectric Constant (Relative Permittivity)(εr) | — | - | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Piezoelectric Modulus(eij) | — | C/m² | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.