IrC3
ceramic· JVASP-153800· IrC3
IrC3 is a ceramic compound belonging to the iridium carbide family, combining iridium metal with carbon in a three-to-one stoichiometric ratio. This material is primarily of research and development interest rather than a mainstream industrial ceramic, positioned within the ultra-high-performance ceramics class alongside other transition metal carbides. IrC3 is investigated for extreme environment applications requiring exceptional hardness, thermal stability, and chemical resistance, with potential use in cutting tools, wear-resistant coatings, and high-temperature structural components in aerospace and defense contexts.
high-temperature ceramicswear-resistant coatingscutting tool insertsextreme environment applicationsresearch/development materials
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 27,696.4 | ksi | — | ||
Poisson's Ratio(ν) | 0.1900 | - | — | ||
Shear Modulus(G) | 21,548.3 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3501 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.7080 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.7056 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.