InSnCl3

ceramic

· JVASP-33897· InSnCl3

InSnCl3 is an inorganic chloride compound combining indium, tin, and chlorine, classified as a ceramic material. This compound belongs to the family of mixed-metal halides and is primarily investigated in materials research for applications requiring ionic conductivity or specific electrochemical properties. While not yet widely established in mainstream industrial production, InSnCl3 and related indium-tin chlorides show potential in emerging technologies where tin and indium's electronic properties can be leveraged in a chloride matrix.

electrochemical researchhalide-based ceramicsexperimental catalysisionic conductorsmaterials research applications

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

Units:

si imperial

Property	Value	Unit	Conditions	Source
Density(ρ)	0.1185	lb/in³	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Filter by

Method

Carrier

Property	Value	Unit	Conditions
Band Gap(Eg)2 entries	2.821	eV	DFT · OptB88vdW
↳	3.293	eV	DFT · TBmBJ
Dielectric Constant (Relative Permittivity)(εr)	30.06	-	DFT · OptB88vdW
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries	5.070	-	DFT · OptB88vdW
↳	4.010	-	DFT · TBmBJ
Magnetic Moment(μB)	0.000	µB	DFT · OptB88vdW
Piezoelectric Modulus(eij)	0.09592	C/m²	DFT · OptB88vdW
Thermoelectric Power Factor(PF)2 entries	0.00171	W/(m·K²)	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	0.000356	W/(m·K²)	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Seebeck Coefficient(S)2 entries	-355	μV/K	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	338	μV/K	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Spectroscopic Limited Maximum Efficiency (SLME)(SLME)	2.320	%	DFT · TBmBJ

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Energy Above Hull(ΔEhull)	0.06270	eV/atom	DFT · OptB88vdW
Formation Energy(ΔHf)	-0.9531	eV/atom	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

InSnCl3 — Properties & Data | MatWorld

InSnCl3

Physical Properties

Electrical Properties

Other Properties

Regulatory Screening

Environmental