InO2F
ceramic· JVASP-118271· InO2F
InO₂F is an indium oxide fluoride ceramic compound that belongs to the family of mixed metal oxyfluorides, materials of interest in advanced ceramics research. While not widely commercialized, this material is primarily investigated for applications requiring a combination of ceramic hardness, thermal stability, and unique electronic or optical properties that oxide-fluoride hybrid compositions can offer. Its potential lies in niche applications where the fluoride component may enhance sintering behavior, reduce grain growth, or provide improved chemical resistance compared to conventional oxides.
advanced ceramics researchoptical coatings (experimental)refractory applicationselectronic device substrates (emerging)thermal barrier materials (development stage)
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.