Inconel 718 (L-PBF, EOS NickelAlloy IN718) — Properties & Data | MatWorld

Inconel 718 (L-PBF, EOS NickelAlloy IN718)

UNS N07718· EOS NickelAlloy IN718

EOS NickelAlloy IN718 is one maker's grade of Inconel 718, a precipitation-hardening nickel superalloy, supplied as powder for laser powder bed fusion. Rapid solidification gives a fine cellular-dendritic structure with niobium segregation and columnar grains along the build direction, so properties differ between build orientations. Parts need supports and a stress relief before removal from the plate. They then usually receive solution treatment and aging, often with hot isostatic pressing, and machining of critical surfaces. Typical uses are gas turbine and rocket engine parts such as combustor components, injectors and heat exchangers with internal channels. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

gas turbine partsrocket engine partscombustor componentsinjectorsheat exchangers

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 718 (L-PBF)/Inconel 718 (L-PBF, EOS NickelAlloy IN718)

Units:

si imperial

Property	Value	Unit	Conditions	Source
Hardness (Vickers)(HV)	463	HV	EOS M 400-4 \| 40 µm HiPro · ISO 6507

Verified Unverified Low confidence (<80%) Link to source

Filter by

Temperature

Property	Value	Unit	Conditions	Source
Coefficient of Thermal Expansion(α (CTE))	7.278 – 8.611	µin/in·°F	7 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Filter by

Table

Property	Value	Unit	Conditions	Source
Density(ρ)	0.2944 – 0.2981	lb/in³	6 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

Inconel 718 (L-PBF, EOS NickelAlloy IN718)

Mechanical Properties

Thermal Properties

Physical Properties

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific