Inconel 718 (L-PBF, EOS NickelAlloy IN718, as-built) — Properties & Data | MatWorld

Inconel 718 (L-PBF, EOS NickelAlloy IN718, as-built)

UNS N07718· EOS NickelAlloy IN718

EOS NickelAlloy IN718 in the as-built condition is Inconel 718 made by laser powder bed fusion from this maker's powder, before any heat treatment. Rapid solidification leaves a fine cellular structure with columnar grains along the build direction and niobium segregation between cells, without the gamma double prime precipitation that age-hardens the alloy. Parts carry high residual stress, differ between build directions, need supports and have rough surfaces, so they are usually stress relieved on the plate, then solution treated and aged, often with hot isostatic pressing. The as-built state is mainly a starting point for turbine and rocket engine parts, brackets and heat exchangers. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

turbine partsrocket engine partsbracketsheat exchangers

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 718 (L-PBF)/Inconel 718 (L-PBF, EOS NickelAlloy IN718, as-built)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Table

Orientation

Specification

Property	Value	Unit	Conditions
Elongation at Break(εf)	25.00 – 36.00	%	14 entriesClick to expand
Ultimate Tensile Strength(σUTS)	0.9570 – 1.092	GPa	14 entriesClick to expand
Yield Strength (0.2% offset)(σy)	620.0 – 800.0	MPa	14 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.221	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.