Inconel 718 (L-PBF, as-built)

UNS N07718

Inconel 718 printed by laser powder bed fusion in the as-built condition is the nickel-chromium-iron superalloy as it leaves the machine, before any stress relief, hot isostatic pressing or aging. Rapid melting and solidification give cellular-dendritic grains growing in columns along the build direction, with niobium and molybdenum segregated between dendrites, so properties differ between build and in-plane directions. High residual stress remains and can distort parts when they are removed from the build plate, and the surface is rough with support marks. It is used for prototypes, test coupons and parts that will be heat treated and finished afterward, such as turbine and combustor components.

prototypestest couponsturbine componentscombustor components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 718 (L-PBF)/Inconel 718 (L-PBF, as-built)

Units:

si imperial

Property OverviewNormalized to typical max values

10 interactive curves for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Filter by

Source

Temperature

Test

Machine

Strain Rate

Orientation

Property	Value	Unit	Conditions
Elongation at Break(εf)3 entries	31.73 range 22.69–37.29	%	20°C · ε̇=0.001/s · n = 8 · as-built
↳	36.60 range 35.40–37.80	%	25°C · as-built · Z (tensile axis para
↳	42.80 range 34.50–51.10	%	650°C · as-built · Z (tensile axis para
Stress–Strain Curve(σ–ε)	—	ksi	10 entriesClick to expand
Ultimate Tensile Strength(σUTS)3 entries	137.7 range 136.3–139.8	ksi	20°C · ε̇=0.001/s · n = 8 · as-built
↳	140.3 range 139.4–141.1	ksi	25°C · as-built · Z (tensile axis para
↳	117.9 range 116.8–119.1	ksi	650°C · as-built · Z (tensile axis para
Yield Strength (0.2% offset)(σy)3 entries	101.6 range 100.8–102.4	ksi	20°C · ε̇=0.001/s · n = 8 · as-built
↳	92.53 range 90.50–94.56	ksi	25°C · as-built · Z (tensile axis para
↳	82.24 range 80.35–84.12	ksi	650°C · as-built · Z (tensile axis para

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.2970	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

Inconel 718 (L-PBF, as-built) — Properties & Data | MatWorld