Inconel 718 (L-PBF, 3D Systems LaserForm Ni718 (A)) — Properties & Data | MatWorld

Inconel 718 (L-PBF, 3D Systems LaserForm Ni718 (A))

UNS N07718· LaserForm Ni718 (A)

LaserForm Ni718 (A) is the 3D Systems grade of Inconel 718 for laser powder bed fusion, a precipitation-hardening nickel superalloy printed from powder into dense parts. As printed, it has a fine cellular-dendritic structure with columnar grains along the build direction, niobium segregation and high residual stress, so parts need supports and stress relief before removal from the build plate. Hot isostatic pressing, solution treatment and ageing then close porosity, precipitate the strengthening phases and reduce anisotropy. Printed parts serve in gas turbine and rocket engine hardware such as combustor parts, fuel nozzles, brackets and heat exchangers. Every value on this page is read from 3D Systems' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

gas turbine hardwarerocket engine hardwarecombustor partsfuel nozzlesbracketsheat exchangers

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 718 (L-PBF)/Inconel 718 (L-PBF, 3D Systems LaserForm Ni718 (A))

Units:

si imperial

Filter by

Temperature

Property	Value	Unit	Conditions
Melting Point / Solidus(Tm)	1,570.7 range 1,533.2–1,608.2	K	notes
Thermal Conductivity(k)2 entries	11.40	W/(m·K)	21°C
↳	18.30	W/(m·K)	100°C
Coefficient of Thermal Expansion(α (CTE))2 entries	0.0000132	1/K	200°C
↳	0.0000139	1/K	600°C

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.200	kg/m³	notes

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.