Inconel 706 STA
metalUNS N09706
aerospacestructural
Compliance & Regulations
?ITAR?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | Curve (6 pts) | ksi | L | — | |
Compressive Tangent Modulus vs Stress(Etn(σ)) | — | ksi | 8 entriesClick to expand | ||
Elongation at Break(εf) | Curve (15 pts) | - | L | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet/Strip/Plate | — | |
Stress–Strain Curve(σ–ε) | Curve (17 pts) | ksi | 21°C · L | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | ksi | 16 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | Curve (16 pts) | ksi | L | — | |
Yield Strength (0.2% offset)(σy) | Curve (16 pts) | ksi | L | — | |
Young's Modulus(E) | Curve (6 pts) | ksi | L | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (11 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (24 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (6 pts) | BTU/(hr·ft·°F) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.