Inconel 625 (L-PBF, EOS NickelAlloy IN625, as-built) — Properties & Data | MatWorld

Inconel 625 (L-PBF, EOS NickelAlloy IN625, as-built)

UNS N06625· EOS NickelAlloy IN625

EOS NickelAlloy IN625 is one maker's grade of the nickel-chromium-molybdenum-niobium alloy Inconel 625 printed by laser powder bed fusion, here in the as-built condition. As built, it has a fine cellular-dendritic structure with columnar grains along the build direction and niobium and molybdenum segregated at cell boundaries. This makes it stronger but less ductile than annealed wrought alloy and gives it properties that differ between build directions. Parts carry high residual stress and a rough surface, need supports on overhangs, and are usually stress relieved before removal from the plate. They are used for corrosion- and heat-resistant manifolds, heat exchangers, ducting and combustion hardware. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

manifoldsheat exchangersductingcombustion hardware

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 625 (L-PBF)/Inconel 625 (L-PBF, EOS NickelAlloy IN625, as-built)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Table

Orientation

Property	Value	Unit	Conditions
Elongation at Break(εf)	33.00 – 48.00	%	10 entriesClick to expand
Reduction of Area(RA)	46.00 – 63.00	%	8 entriesClick to expand
Ultimate Tensile Strength(σUTS)	0.8700 – 1.030	GPa	10 entriesClick to expand
Yield Strength (0.2% offset)(σy)	630.0 – 760.0	MPa	10 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.442	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.