Inconel 625 is a nickel-chromium-molybdenum superalloy designed for service in oxidizing and corrosive environments up to approximately 2000°F, with excellent fatigue and creep resistance. The annealed condition provides optimal ductility and toughness for fabrication while maintaining outstanding strength retention at elevated temperatures, making it suitable for aerospace engine components, chemical processing equipment, and marine applications.
Compliance & Regulations
16 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | 192 – 281 | ksi | 26 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | 83.00 – 121 | ksi | 26 entriesClick to expand | ||
Compressive Modulus(Ec) | 29,800 | ksi | 22°C · Sheet/Plate | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (15 pts) | ksi | 21°C · L | ||
Compressive Yield Strength(Fcy) | 53.00 – 66.00 | ksi | 24 entriesClick to expand | ||
Elongation at Break(εf) | 30.00 | - | 10 entriesClick to expand | ||
Poisson's Ratio(ν) | 0.2780 | - | — | — | |
Poisson's Ratio vs Temperature(ν(T)) | Curve (11 pts) | - | — | ||
Shear Modulus(G) | 11,800 | ksi | 22°C · Sheet/Plate | ||
Ultimate Shear Strength(Fsu) | 79.00 – 84.00 | ksi | 13 entriesClick to expand | ||
S–N Curve (Wöhler)(S–N) | — | ksi | 12 entriesClick to expand | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (10 pts) | ksi | 21°C · L | ||
Ultimate Tensile Strength(σUTS) | 118 – 128 | ksi | 26 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 53.00 – 63.00 | ksi | 25 entriesClick to expand | ||
Young's Modulus(E) | 30,022.8 | ksi | — | — | |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (7 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (6 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity(k) | 5.662 | BTU/(hr·ft·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (9 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3049 | lb/in³ | — | — |