HfSiO4
ceramic· HfSiO4
Hafnium silicate (HfSiO₄) is a ceramic compound combining hafnium oxide with silica, forming a dense refractory material with high thermal stability. It is primarily used in advanced aerospace, nuclear, and high-temperature thermal protection applications where exceptional resistance to oxidation and thermal cycling is required. HfSiO₄ competes favorably with zirconia and other refractory ceramics in extreme environments because of hafnium's high atomic number and strong bonding within the silicate lattice, making it particularly valuable for thermal barrier coatings, nuclear fuel cladding, and space vehicle heat shields.
thermal barrier coatingsrefractory liningsnuclear fuel claddingspacecraft heat protectionhigh-temperature structural ceramicsaerospace engine components
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Dielectric Constant (Relative Permittivity)(εr) | — median of 2 measurements | - | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.