Hastelloy X (L-PBF, Velo3D Hastelloy X, HIP)

UNS N06002· Hastelloy X

Velo3D Hastelloy X is the maker's grade of Hastelloy X, a nickel-chromium-iron-molybdenum alloy, printed by laser powder bed fusion and hot isostatically pressed. As printed, it has a fine cellular structure with grains elongated along the build direction, high residual stress and a tendency to solidification microcracking, giving direction-dependent properties. Hot isostatic pressing closes internal pores and cracks and recrystallizes the structure, reducing anisotropy and improving ductility and fatigue behaviour. Supports and rough surfaces still need removal and finishing. Parts are used for combustor liners, fuel nozzles, heat exchangers and other hot-section gas turbine components. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

combustor linersfuel nozzlesheat exchangershot-section gas turbine components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Hastelloy X (L-PBF)/Hastelloy X (L-PBF, Velo3D Hastelloy X, HIP)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Property	Value	Unit	Conditions
Elongation at Break(εf)2 entries	51.00	%	mean −3σ · HIP · ASTM E8 · Z
↳	57.70	%	HIP · ASTM E8 · Z
Ultimate Tensile Strength(σUTS)2 entries	93.26	ksi	mean −3σ · HIP · ASTM E8 · Z
↳	95.43	ksi	HIP · ASTM E8 · Z
Yield Strength (0.2% offset)(σy)2 entries	43.95	ksi	mean −3σ · HIP · ASTM E8 · Z
↳	46.85	ksi	HIP · ASTM E8 · Z
Young's Modulus(E)2 entries	21,465.6	ksi	mean −3σ · HIP · ASTM E8 · Z
↳	29,587.7	ksi	HIP · ASTM E8 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.2970	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

Hastelloy X (L-PBF, Velo3D Hastelloy X, HIP) — Properties & Data | MatWorld