H3C2SNO
ceramic· JVASP-103814· H3C2SNO
H3C2SNO is a nitrogen-containing ceramic compound with a mixed composition incorporating carbon, sulfur, and oxygen elements. While not a commonly established commercial ceramic, this composition suggests potential as a specialized functional ceramic for applications requiring combined thermal, chemical, or electrical properties distinct from conventional oxide or nitride ceramics. Research into such mixed-anion ceramics typically targets niche engineering problems where conventional materials fall short, such as thermal management in extreme environments, chemical-resistant coatings, or composite reinforcement phases.
thermal barrier coatingshigh-temperature compositeschemical-resistant surfacesresearch ceramicsadvanced refractory materialsexperimental functional ceramics
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | Pa | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.