GaNO
ceramic· JVASP-114278· GaNO
Gallium nitride oxynitride (GaNO) is an advanced ceramic compound combining gallium nitride with oxygen incorporation, representing an emerging material in the wide-bandgap semiconductor and ceramic family. While primarily in research and development stages, GaNO is being investigated for high-temperature structural applications and advanced electronic devices where enhanced oxidation resistance and modified bandgap properties compared to pure GaN offer potential advantages over conventional nitride ceramics.
High-temperature structural ceramicsPower electronics and RF devicesOxidation-resistant coatingsWide-bandgap semiconductor researchThermal barrier applications
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 57.13 range -1.110–115.4median of 2 measurements | GPa | — | ||
Poisson's Ratio(ν) | 0.05000 | - | — | ||
Shear Modulus(G) | -2.440 range -3.570–-1.310median of 2 measurements | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 4.198 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 2.181 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.9390 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.