Fe2OF3
ceramic· Fe2OF3
Fe2OF3 is an iron-based ceramic compound combining iron oxide with fluorine, belonging to the family of mixed-anion ceramics. This material is primarily of research interest rather than established in high-volume industrial production; it represents exploration into how fluorine incorporation modifies the properties of iron oxide ceramics for potential advanced applications. The material's notable characteristics stem from its mixed anionic structure, which can influence thermal stability, chemical reactivity, and electronic behavior compared to conventional iron oxides.
research and development materialsadvanced ceramic coatingscatalytic applicationssolid-state chemistry studieshigh-temperature corrosion resistance evaluation
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1565 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr) | 501.7 | - | — | ||
Magnetic Moment(μB) | 8.088 | µB | — | ||
Piezoelectric Modulus(eij)2 entries | 0.3983 | C/m² | — | ||
| ↳ | 0.8582 | C/m² | — | ||
Piezoelectric Stress Tensor(eij) | Matrix (redacted) | C/m² | — | ||
Seebeck Coefficient(S) | -30.67 | µV/K | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.05880 | eV/atom | — | ||
Formation Energy(ΔHf) | -1.881 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.