ErTlO2
ceramic· JVASP-49934· ErTlO2
ErTlO2 is a rare-earth thallium oxide ceramic compound combining erbium and thallium in an oxide matrix. This is a specialized research material rather than a widely commercialized engineering ceramic; it belongs to the family of rare-earth oxides being investigated for high-temperature and optical applications. The material's potential relevance stems from rare-earth ceramics' use in demanding thermal and photonic environments, though ErTlO2 specifically remains primarily in experimental development with limited industrial deployment.
experimental optical materialshigh-temperature ceramics researchrare-earth compound developmentphotonic device substratesthermal barrier coating candidatessolid-state laser hosts (potential)
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Dielectric Constant (Relative Permittivity)(εr) | — | - | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Piezoelectric Modulus(eij) | — | C/m² | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.