ErIn
ceramic· JVASP-16506· ErIn
ErIn is an intermetallic ceramic compound combining erbium and indium, belonging to the rare-earth intermetallic family. This material is primarily of research and development interest rather than established commercial production, with applications explored in high-temperature structural ceramics and specialized electronic devices where rare-earth properties are advantageous. Engineers would consider ErIn for niche applications requiring thermal stability, electrical functionality, or neutron absorption characteristics inherent to erbium-based compounds, though material availability and cost typically limit adoption to specialized defense, nuclear, or advanced research settings.
high-temperature ceramicsrare-earth intermetallicsnuclear/neutron applicationselectronic device substratesresearch-phase materialsspecialized thermal management
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 61.80 | GPa | — | ||
Poisson's Ratio(ν) | 0.3600 | - | — | ||
Shear Modulus(G) | 28.26 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 9.166 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -7.170 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.01370 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.4474 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.