DyIn
ceramic· JVASP-14882· DyIn
DyIn is an intermetallic ceramic compound combining dysprosium (a rare earth element) with indium, forming a hard, dense material in the rare earth intermetallic family. This is primarily a research and specialty material used in advanced applications where rare earth properties—such as magnetic behavior, thermal stability, or neutron absorption characteristics—are leveraged in ceramic or composite form. While not widely commercialized, DyIn and similar rare earth intermetallics are investigated for high-temperature structural applications, nuclear reactor materials, and specialized electronic or photonic devices where dysprosium's unique electronic and magnetic properties are critical.
Nuclear reactor materialsHigh-temperature ceramicsRare earth research compoundsMagnetic/electronic devicesSpecialty aerospace composites
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.