Custom 450 Stainless Steel H1100
VerifiedmetalCustom 450 stainless steel is a martensitic stainless steel with approximately 13% chromium and 1% molybdenum, designed for high-strength aerospace and turbine engine applications requiring elevated temperature strength and corrosion resistance. The H1100 condition (hardened and tempered to approximately 1100°F) provides tensile strengths typically in the 180–200 ksi range with moderate elongation, balancing hardness and fracture toughness for critical rotating components.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Bar | — | |
Elongation at Break(εf)2 entries | — | - | 22°C · Bar · H1100 · AMS 5773 · L · t=≤12.000 in | — | |
| ↳ | — | - | 22°C · Bar · H1100 · AMS 5773 · LT · t=≤12.000 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Bar | — | |
Ultimate Tensile Strength(σUTS)2 entries | — | Pa | 22°C · Bar · H1100 · AMS 5773 · L · t=≤12.000 in | — | |
| ↳ | — | Pa | 22°C · Bar · H1100 · AMS 5773 · LT · t=≤12.000 in | — | |
Yield Strength (0.2% offset)(σy)2 entries | — | Pa | 22°C · Bar · H1100 · AMS 5773 · L · t=≤12.000 in | — | |
| ↳ | — | Pa | 22°C · Bar · H1100 · AMS 5773 · LT · t=≤12.000 in | — | |
Young's Modulus(E) | — | Pa | 22°C · Bar | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (16 pts) | 1/K | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.