CuRhO2 is a ternary ceramic oxide compound combining copper, rhodium, and oxygen. This material belongs to the delafossite family of oxides, which are primarily of research interest for their potential in transparent conducting oxides and advanced catalytic applications rather than established industrial production. The cuprate-rhodate system is investigated for specialized electrochemical devices, photocatalysis, and potentially high-temperature structural ceramics, though it remains largely in the experimental phase without widespread commercial deployment.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K)2 entries | 23,780.7 | ksi | DFT | ||
| ↳ | 26,282.3 | ksi | DFT · OptB88vdW | ||
Poisson's Ratio(ν) | 0.3800 | - | DFT · OptB88vdW | ||
Shear Modulus(G)2 entries | 6,491.6 | ksi | DFT | ||
| ↳ | 7,679.7 | ksi | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2484 | lb/in³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.9060 | eV | DFT · OptB88vdW | ||
Dielectric Constant (Relative Permittivity)(εr)3 entries | 13.37 | - | DFT · OptB88vdW | ||
| ↳ | 13.71 | - | DFT · PBE | ||
| ↳ | 12.81 range 12.13–13.49median of 2 measurements | - | DFT · PBEsol | ||
High-Frequency Dielectric Constant (ε∞)(ε∞) | 11.42 | - | DFT · OptB88vdW | ||
Electronic Dielectric Tensor(ε∞) | Matrix (redacted) | - | DFT · PBE | ||
Total Dielectric Tensor(ε) | Matrix (redacted) | - | DFT · PBE | ||
Electron Effective Mass(m*e) | 0.5933 | me | DFT · OptB88vdW · 27°C | ||
Hole Effective Mass(m*h) | 2.577 | me | DFT · OptB88vdW · 27°C | ||
Electrical Conductivity(σ) | 4.560 | S/cm | Measured · 127°C | ||
Electrical Resistivity(ρe) | 0.00219 | Ω·m | Measured · 127°C | ||
Magnetic Moment(μB) | 0.000 | µB | DFT · OptB88vdW | ||
Piezoelectric Modulus(eij) | 0.000 | C/m² | DFT · OptB88vdW | ||
Thermoelectric Power Factor(PF)3 entries | 0.0000346 | W/(m·K²) | Measured · 127°C | ||
| ↳ | 0.00371 | W/(m·K²) | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 0.00219 | W/(m·K²) | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Seebeck Coefficient(S)3 entries | 275.3 | μV/K | Measured · 127°C | ||
| ↳ | -293.2 | μV/K | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 371.3 | μV/K | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Spectroscopic Limited Maximum Efficiency (SLME)(SLME) | 25.95 | % | DFT · TBmBJ |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf) | -0.7913 | eV/atom | DFT · OptB88vdW |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data