CuO2
ceramic· JVASP-85357· CuO2
CuO2 is a copper oxide ceramic compound that exists primarily in research and experimental contexts rather than as a widely established commercial material. While copper oxides (particularly CuO and Cu2O) have established applications in electronics and catalysis, CuO2 represents an intermediate or higher oxidation state form that is studied for potential applications in advanced oxidation catalysis, superconductor research, and electrochemical systems. Engineers considering this material should recognize it as a specialized research compound rather than a production-ready ceramic, with properties and stability that may vary significantly depending on synthesis method and operating conditions.
Experimental catalysisResearch oxidation systemsSuperconductor studiesElectrochemical devicesHigh-temperature oxidation environments
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | Pa | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.