CuC2N
metal· JVASP-136206· CuC2N
CuC2N is a copper-based interstitial compound combining copper with carbon and nitrogen elements, representing an experimental or specialized alloy composition not widely commercialized. This material family is of research interest for applications requiring combinations of copper's thermal and electrical conductivity with enhanced hardness and wear resistance from carbide and nitride phases. Engineers would evaluate CuC2N where conventional copper alloys lack sufficient hardness or where novel material properties from multi-element bonding could address performance gaps in extreme environments.
wear-resistant coatingshigh-hardness applicationsresearch compoundsthermal management with hardnessspecialty alloy developmentfriction reduction surfaces
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 43,585.3 | ksi | — | ||
Poisson's Ratio(ν) | 0.2100 | - | — | ||
Shear Modulus(G) | 31,773.4 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2054 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 1.211 | eV/atom | — | ||
Formation Energy(ΔHf) | 1.206 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.