CuBiTeO
ceramic· JVASP-150073· CuBiTeO
CuBiTeO is a copper-bismuth-tellurium oxide ceramic compound. This is an experimental material primarily studied in materials research for potential thermoelectric and optoelectronic applications, leveraging the properties of bismuth telluride-based systems modified with copper incorporation. While not yet widely deployed in mainstream industrial production, materials in this family are investigated for energy conversion and advanced electronic devices where bismuth telluride compounds have established relevance.
thermoelectric devices (research phase)semiconductor applicationsthermal management systemsoptoelectronic materials (exploratory)high-temperature electronicsmaterials research and development
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 10,310.7 | ksi | — | ||
Poisson's Ratio(ν) | 0.4300 | - | — | ||
Shear Modulus(G) | 2,763 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3137 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.1330 range 0.000–0.2660median of 2 measurements | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.01110 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.6321 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.