Copper Beryllium TF00
VerifiedmetalCopper-beryllium alloy (typically 1.6-2.0% Be) used in aerospace and defense applications requiring high strength-to-weight ratio and excellent electrical conductivity; TF00 temper is the fully annealed condition providing maximum ductility and workability with yield strength around 70-90 MPa and elongation typically exceeding 40%, suitable for forming operations before final hardening.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Elongation at Break(εf) | — | - | 22°C · Strip · TF00 · ASTM B194 AMS 4530a · L · t=≤0.188 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Strip | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 22°C · Strip · TF00 · ASTM B194 AMS 4530a · L · t=≤0.188 in | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | 22°C · Strip · TF00 · ASTM B194 AMS 4530a · L · t=≤0.188 in | — | |
Young's Modulus(E) | — | ksi | 22°C · Strip | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (19 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (19 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | BTU/(hr·ft·°F) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.