Co₃Mo is an intermetallic compound combining cobalt and molybdenum, belonging to the family of transition metal intermetallics. This material is primarily of research and developmental interest rather than a mature commercial alloy, with potential applications in high-temperature structural applications where superior hardness and stiffness are required alongside moderate density.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K)3 entries | 37,771.4 | ksi | DFT | ||
| ↳ | 38,343.6 | ksi | DFT · OptB88vdW | ||
| ↳ | 37,771.4 | ksi | DFT · PBE | ||
Elastic Compliance Tensor(Sij) | Matrix (redacted) | 1/GPa | DFT · PBE | ||
Elastic Anisotropy(AU) | 0.1338 | - | DFT · PBE | ||
Elastic Stiffness Tensor(Cij) | Matrix (redacted) | ksi | DFT · PBE | ||
Poisson's Ratio(ν)2 entries | 0.2900 | - | DFT · OptB88vdW | ||
| ↳ | 0.2815 | - | DFT · PBE | ||
Shear Modulus(G)3 entries | 19,320 | ksi | DFT | ||
| ↳ | 19,031.9 | ksi | DFT · OptB88vdW | ||
| ↳ | 19,320 | ksi | DFT · PBE |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3566 | lb/in³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg)2 entries | 0.000 | eV | DFT · OptB88vdW | ||
| ↳ | 0.000 | eV | DFT · TBmBJ | ||
Magnetic Moment(μB) | 0.9000 | µB | DFT · OptB88vdW | ||
Thermoelectric Power Factor(PF)2 entries | 0.00186 | W/(m·K²) | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 0.00187 | W/(m·K²) | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Seebeck Coefficient(S)2 entries | 32.27 | μV/K | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 32.25 | μV/K | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf) | -0.09324 | eV/atom | DFT · OptB88vdW |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data