Clad 7475 Aluminum T61
VerifiedmetalClad 7475 aluminum alloy in T61 temper is a high-strength aerospace aluminum with zinc, magnesium, and copper alloying elements, featuring a protective pure aluminum cladding layer that provides superior corrosion resistance while maintaining exceptional bearing strength and fatigue resistance for critical airframe components. T61 condition achieves its properties through solution heat treatment and controlled aging, delivering yield strengths in the 435–460 MPa range with good damage tolerance suitable for aircraft wing and fuselage structure applications per AMS 4207 specification.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Thickness
e/D Ratio
Basis
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | — | ksi | 8 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | — | ksi | 8 entriesClick to expand | ||
Compressive Modulus(Ec) | — | ksi | 22°C · Sheet | — | |
Compressive Yield Strength(Fcy) | — | ksi | 8 entriesClick to expand | ||
Elongation at Break(εf)3 entries | — | - | 22°C · Sheet · T61 · AMS 4207 · LT · t=0.040-0.062 in | — | |
| ↳ | — | - | 22°C · Sheet · T61 · AMS 4207 · LT · t=0.063-0.187 in | — | |
| ↳ | — | - | 22°C · Sheet · T61 · AMS 4207 · LT · t=0.188-0.249 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet | — | |
Ultimate Shear Strength(Fsu)4 entries | — | ksi | 22°C · Sheet · T61 · AMS 4207 · t=0.040-0.062 in | — | |
| ↳ | — | ksi | 22°C · Sheet · T61 · AMS 4207 · t=0.063-0.187 in | — | |
| ↳ | — | ksi | 22°C · Sheet · T61 · AMS 4207 · t=0.063-0.187 in | — | |
| ↳ | — | ksi | 22°C · Sheet · T61 · AMS 4207 · t=0.188-0.249 in | — | |
S–N Curve (Wöhler)(S–N)3 entries | Curve (14 pts) | ksi | — | — | |
| ↳ | Curve (16 pts) | ksi | — | — | |
| ↳ | Curve (15 pts) | ksi | — | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 8 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | — | ksi | 8 entriesClick to expand | ||
Young's Modulus(E) | — | ksi | 22°C · Sheet | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.