Clad 7475 Aluminum T61511
metalClad 7475 aluminum alloy T61511 is a high-strength aerospace aluminum with zinc, magnesium, and copper as primary alloying elements, clad with commercially pure aluminum for enhanced corrosion resistance and fatigue crack initiation resistance. The T61511 temper (solution heat-treated, stress-relieved by stretching, and artificially aged) provides ultimate tensile strength of approximately 70–75 ksi with improved stress-corrosion cracking resistance compared to unclad 7475, making it suitable for critical airframe components and pressure vessels operating at elevated temperatures up to ~250°F.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Sheet | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet | — | |
Young's Modulus(E) | — | ksi | 22°C · Sheet | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.