CIN
ceramic· JVASP-5758· CIN
CIN is a ceramic compound with unspecified composition, likely a carbide, nitride, or mixed ceramic phase based on the nomenclature convention. It exhibits moderate stiffness and density in the range typical of structural ceramics, making it a candidate for applications requiring hardness and thermal stability. Without detailed compositional information, this material appears to be either a research compound or a specialized industrial ceramic; engineers should verify its specific phase composition, manufacturing method, and certified properties before specification for critical applications.
ceramic composites researchhigh-temperature applicationswear-resistant coatingsstructural ceramicsmaterials development
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 17.10 | GPa | — | ||
Poisson's Ratio(ν) | 0.2600 | - | — | ||
Shear Modulus(G) | 10.66 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 3.366 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 4.301 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr) | 5.294 | - | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Piezoelectric Modulus(eij) | 0.2778 | C/m² | — | ||
Seebeck Coefficient(S) | -349.6 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.5613 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.5551 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.