CClF3

ceramic

· CClF3

CClF₃ (chlorine trifluoride compound) is a highly reactive halogenated ceramic material with potential applications in specialized chemical and thermal environments. This compound belongs to the interhalogen ceramic family and represents an experimental/research-phase material rather than a widely commercialized engineering ceramic. Its extreme reactivity and corrosive nature make it valuable for specialized chemical processing and high-energy applications where conventional materials fail, though handling and integration challenges limit mainstream adoption compared to traditional ceramics like alumina or zirconia.

experimental propellant systemshalogen-based chemical processinghigh-reactivity oxidant vesselsnuclear fuel reprocessingresearch fluorine chemistryspecialty corrosive environments

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

Units:

si imperial

Property	Value	Unit	Conditions
Bulk Modulus(K)	1,359	ksi	DFT · OptB88vdW
Poisson's Ratio(ν)	0.2700	-	DFT · OptB88vdW
Shear Modulus(G)	823.8	ksi	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.08064	lb/in³	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Filter by

Method

Carrier

Property	Value	Unit	Conditions
Band Gap(Eg)2 entries	6.690	eV	DFT · OptB88vdW
↳	8.032	eV	DFT · TBmBJ
Dielectric Constant (Relative Permittivity)(εr)2 entries	2.757	-	DFT · OptB88vdW
↳	2.220	-	DFT · PBE
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries	2.300	-	DFT · OptB88vdW
↳	1.942	-	DFT · TBmBJ
Electronic Dielectric Tensor(ε∞)	Matrix (redacted)	-	DFT · PBE
Total Dielectric Tensor(ε)	Matrix (redacted)	-	DFT · PBE
Piezoelectric Modulus(eij)2 entries	0.2427	C/m²	DFT · OptB88vdW
↳	0.1509	C/m²	DFT · PBE
Piezoelectric Stress Tensor(eij)	Matrix (redacted)	C/m²	DFT · PBE
Thermoelectric Power Factor(PF)2 entries	0.000752	W/(m·K²)	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	0.000334	W/(m·K²)	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Seebeck Coefficient(S)2 entries	-316.3	μV/K	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	501.8	μV/K	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Spectroscopic Limited Maximum Efficiency (SLME)(SLME)	0.000	%	DFT · TBmBJ

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Energy Above Hull(ΔEhull)	0.00160	eV/atom	DFT · OptB88vdW
Formation Energy(ΔHf)	-1.375	eV/atom	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

CClF3 — Properties & Data | MatWorld

CClF3

Mechanical Properties

Physical Properties

Electrical Properties

Other Properties

Regulatory Screening

Environmental