BP
ceramic· BP
BP is a ceramic material with high stiffness and thermal conductivity, characterized by low density and minimal elastic anisotropy. While the specific composition is not detailed here, materials in this class are typically used in thermal management, structural applications requiring lightweight rigidity, and high-temperature environments where ceramic stability is advantageous over metals.
thermal management systemshigh-temperature structural componentslightweight bearing applicationsheat sinks and insulatorsaerospace/automotive thermal barriers
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K)3 entries | 160.5 | GPa | — | ||
| ↳ | 160.5 | GPa | — | ||
| ↳ | 161.6 | GPa | — | ||
Elastic Compliance Tensor(Sij) | Matrix (redacted) | 1/GPa | — | ||
Elastic Anisotropy(AU) | 0.1374 | - | — | ||
Elastic Stiffness Tensor(Cij) | Matrix (redacted) | Pa | — | ||
Poisson's Ratio(ν)2 entries | 0.1222 | - | — | ||
| ↳ | 0.1200 | - | — | ||
Shear Modulus(G)3 entries | 162.1 | GPa | — | ||
| ↳ | 162.1 | GPa | — | ||
| ↳ | 164.9 | GPa | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Thermal Conductivity(k) | 420 | W/(m·K) | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 2.939 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg)2 entries | 4.200 | eV | — | ||
| ↳ | 1.515 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr)3 entries | 9.270 | - | — | ||
| ↳ | 9.034 | - | — | ||
| ↳ | 9.398 range 9.327–9.468median of 2 measurements | - | — | ||
Electronic Dielectric Tensor(ε∞) | Matrix (redacted) | - | — | ||
Total Dielectric Tensor(ε) | Matrix (redacted) | - | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Piezoelectric Modulus(eij)2 entries | 0.01223 | C/m² | — | ||
| ↳ | 0.06173 | C/m² | — | ||
Piezoelectric Stress Tensor(eij) | Matrix (redacted) | C/m² | — | ||
Seebeck Coefficient(S) | -251.6 | µV/K | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf)2 entries | -0.5985 | eV/atom | — | ||
| ↳ | -0.4534 | eV/atom | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.