BiSeCl
ceramic· JVASP-32942· BiSeCl
BiSeCl is an experimental bismuth selenide chloride ceramic compound belonging to the layered halide perovskite family. This material is primarily investigated in solid-state physics and materials research for its potential semiconducting and optoelectronic properties, rather than established industrial production. Interest in BiSeCl-type compounds centers on their potential use in next-generation photovoltaics, thermoelectric devices, and radiation detection applications where bismuth-based materials offer advantages in band structure engineering and stability compared to lead-based alternatives.
experimental optoelectronicsthermoelectric researchradiation detectionphotovoltaic devicesmaterials physics researchhalide perovskite derivatives
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 6,547 | ksi | — | ||
Poisson's Ratio(ν) | 0.4000 | - | — | ||
Shear Modulus(G) | 1,976.9 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2373 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 1.867 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr) | 59.88 | - | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Piezoelectric Modulus(eij) | 0.000 | C/m² | — | ||
Seebeck Coefficient(S) | -233.6 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.6873 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.