Beryllium Hot pressed (ground and etched)
VerifiedmetalHot-pressed beryllium in ground and etched condition offers high strength-to-weight ratio with excellent thermal conductivity and dimensional stability, used primarily in aerospace and defense applications requiring lightweight structural components and precision instruments. This condition provides controlled grain structure and improved machinability compared to as-cast beryllium, with tensile strengths typically ranging 300–450 MPa depending on processing parameters, governed by AMS 7906 specification.
aerospacestructural
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Bar/Tubing/Rod | — | |
Elongation at Break(εf)2 entries | — | - | 22°C · Bar/Tubing/Rod · Hot pressed (ground and etched) · AMS 7906 · L | — | |
| ↳ | — | - | 22°C · Bar/Tubing/Rod · Hot pressed (ground and etched) · AMS 7906 · LT | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Bar/Tubing/Rod | — | |
Ultimate Tensile Strength(σUTS)2 entries | — | ksi | 22°C · Bar/Tubing/Rod · Hot pressed (ground and etched) · AMS 7906 · L | — | |
| ↳ | — | ksi | 22°C · Bar/Tubing/Rod · Hot pressed (ground and etched) · AMS 7906 · LT | — | |
Yield Strength (0.2% offset)(σy)2 entries | — | ksi | 22°C · Bar/Tubing/Rod · Hot pressed (ground and etched) · AMS 7906 · L | — | |
| ↳ | — | ksi | 22°C · Bar/Tubing/Rod · Hot pressed (ground and etched) · AMS 7906 · LT | — | |
Young's Modulus(E) | — | ksi | 22°C · Bar/Tubing/Rod | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (5 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (10 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (7 pts) | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.