BeFeTe2
metal· JVASP-68312· BeFeTe2
BeFeTe2 is an intermetallic compound combining beryllium, iron, and tellurium, representing a research-phase material in the family of ternary metal tellurides. This compound is not widely commercialized and remains primarily of academic interest, with potential applications leveraging the unique electronic and mechanical properties that arise from its mixed-metal composition. Engineers considering this material should treat it as an experimental system; its suitability depends on specialized requirements in emerging technologies rather than established industrial workflows.
research and developmentthermoelectric materials (potential)advanced alloy systemshigh-performance niche applicationsmaterials characterization studiesexperimental metallurgy
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 62.62 | GPa | — | ||
Poisson's Ratio(ν) | 0.08000 | - | — | ||
Shear Modulus(G) | 17.29 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 6.001 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.9799 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.7025 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.