Be2ZnFe
metal· JVASP-67330· Be2ZnFe
Be2ZnFe is an intermetallic compound combining beryllium, zinc, and iron, belonging to the family of lightweight metallic intermetallics. This material is primarily of research and specialized industrial interest rather than a commodity alloy, valued for applications requiring the combination of low density with moderate stiffness and specific strength characteristics typical of beryllium-based systems. Its use is limited to niche applications where beryllium's extreme lightness and high stiffness-to-weight ratio justify the material's cost, complexity, and handling requirements inherent to beryllium metallurgy.
aerospace componentshigh-performance bearingsdefense/military systemsresearch and developmentprecision instrumentationspecialty alloy development
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.