BaYBr₅ is a rare-earth halide ceramic compound combining barium, yttrium, and bromine, representing a member of the halide perovskite family. This is primarily a research-phase material investigated for potential optoelectronic and photonic applications, particularly in scintillation detection, radiation sensing, and solid-state lighting where halide perovskites show promise due to their tunable bandgap and efficient photon emission. While not yet in widespread commercial use, materials in this chemical family are of growing interest as alternatives to traditional oxide ceramics in specialized applications requiring specific optical or radiation-response properties.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1548 | lb/in³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg)2 entries | 3.125 | eV | DFT · OptB88vdW | ||
| ↳ | 3.828 | eV | DFT · TBmBJ | ||
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries | 4.539 | - | DFT · OptB88vdW | ||
| ↳ | 4.257 | - | DFT · TBmBJ | ||
Electron Effective Mass(m*e) | 2.173 | me | DFT · OptB88vdW · 27°C | ||
Hole Effective Mass(m*h) | 1.630 | me | DFT · OptB88vdW · 27°C | ||
Magnetic Moment(μB) | 0.000 | µB | DFT · OptB88vdW | ||
Thermoelectric Power Factor(PF)2 entries | 0.000686 | W/(m·K²) | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 0.000878 | W/(m·K²) | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Seebeck Coefficient(S)2 entries | -276.5 | μV/K | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 194.5 | μV/K | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Spectroscopic Limited Maximum Efficiency (SLME)(SLME) | 0.2000 | % | DFT · TBmBJ |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.08400 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf) | -2.048 | eV/atom | DFT · OptB88vdW |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data